Log in

[Peter Robinson (Monopix)]

Subject sums it up. I have a curtain to stick back onto its roller. Not something I've done before. Any recommendations for glue to use?

[Rick_oleson (Rick_oleson)]

Over many years, my choice has been a rubber-based contact cement, such as Pliobond or Weldwood Contact Cement.  However, this can be hard to handle with extremely thin curtains such as those in a Leica rangefinder because the solvents cause the rub

[Rick_oleson (Rick_oleson)]

https://www.amazon.com/W-J-Ruscoe-P-612-LV-Multi-Purpose/dp/B004JOYXR4/
 
[url=https://www.amazon.com/Weldwood-Contact-Cement-Squeeze-20-ml/dp/B08DSK9N7Q

[Rick_oleson (Rick_oleson)]

Here's another transfer tape - 3M 467.  The adhesive is essentially the same as 3M 924; the difference is that 924 is wound with the paper on the inside and the adhesive on the outside, for use with an applicator tool..... 467 is wound with the paper

[Peter Robinson (Monopix)]

Rick, Thank you very much for taking the time to provide this info. It's really appreciated. And, believe it or not, I already have some 467 tape as I find it's good for sticking covers on to cameras. So I'll go with that. Thanks again.

[Rick_oleson (Rick_oleson)]

That should work!
: ) =