Updates:

Welcome to our updated forum!  VIP Members can reset their password using their username or email address.

Nikon FG and Nikkormat FT3 problem! Help!

Started by Dave, Mar 03, 2004, 07:38 AM

Previous topic - Next topic

Gary Lim

Mar 03, 2004, 07:38 AM Last Edit: Sep 20, 2024, 01:49 AM by smf_adm
 Hi all:
 
It has been a fairly unlucky week for me.  My nikkormat FT3 and FG died on me within a few days.  My FT3 got stuck at B setting and firing is intermittent.  I tried to clean the cocking ram but it doesn't seem to work.
 
FG just tot

Ed

Mar 03, 2004, 10:00 PM #1 Last Edit: Sep 20, 2024, 01:49 AM by smf_adm
 On the FG, make sure the batteries are good.  Set shutter to B and see that unjams it.

Gary

Mar 07, 2004, 05:23 AM #2 Last Edit: Sep 20, 2024, 01:49 AM by smf_adm
 Hi:
 
I got it fixed!  It's a bent disk on the bottom.  I spent quick some time to figure this out but it's working fine now.  
 
Still haven't figured out how to fix FT3 yet...
 
Gary

Erik James Rairden

Mar 28, 2004, 08:22 PM #3 Last Edit: Sep 20, 2024, 01:49 AM by smf_adm
 I've got an Nikon FG.  I just found out their shutters are electronic.  With mine the shutter curtains will not open except on M90 and Bulb shutter settings.  Does this mean a computer chip is too old in it?  How much for repair?

Erik James Rairden

Mar 28, 2004, 08:24 PM #4 Last Edit: Sep 20, 2024, 01:49 AM by smf_adm
 And I replaced the batteries.  I just got into photography and found this camera in our storage.

John

May 02, 2004, 11:36 PM #5 Last Edit: Sep 20, 2024, 01:49 AM by smf_adm
 I also have got a FG and have the same problem shutter works only on B M90.  Replaced the battries and found no differance.  I could cycle the shutter however after it remained open by removing the battery.

Dave

Apr 21, 2006, 10:46 AM #6 Last Edit: Sep 20, 2024, 01:49 AM by smf_adm
 Did anyone find a *cure* for this problem because I am experiencing the same one, OK on B and M90 but nothing on any of the other settings