Log in

[Alan]

hi - after removing the top plate from my contaflex II and reassembling i'm embarassed to say i've got a spare washer. 8mm with a ~7mm hole. everything works ok but i'd still like to know where it came from. i've put a small pic at [url=http://hom

[Jon Goodman]

 That one is a spacer washer, and it is used in the film rewind mechanism.  I can look at my notes later.
Jon

[Alan]

 that'd be great - thanks Jon. I'd guessed it must be from there, but it doesn't fit over the main spindle  that the film rewind knob screws onto, so i couldn't work out where it had come from.

[Jon Goodman]

 The notes I've made to myself tell me it sits between the rewind fork and the body...that is I think it sits on top of the rewind fork shoulder.  Please check me on that.  I don't have the measurements, but I think it is the same one.  
Jon