Updates:

Welcome to our updated forum!  VIP Members can reset their password using their username or email address.

Petri FTee/Olympus OM-1 (Disassembly)

Started by Rick_oleson, Dec 22, 2007, 01:28 AM

Previous topic - Next topic

Leopost

Dec 22, 2007, 01:28 AM Last Edit: Sep 20, 2024, 01:24 AM by smf_adm
Hi,  
I've been shooting digital for the past few years and I've finally made the conservative effort to shoot film.
I ordered three cameras off of eBay -- an Olympus OM-1, Olympus Pen EES-2, and a Petri FTee, along with a few cool lenses

Mikel

Dec 22, 2007, 01:48 AM #1 Last Edit: Sep 20, 2024, 01:24 AM by smf_adm
Let me start with the most difficult of these cameras to repair.
 
That would be the Petri. Like all of the early shutter preferred auto SLR's, it is a very complex camera mechanically and should not be your first experience in camera repair. I u

Leopost

Dec 22, 2007, 07:10 AM #2 Last Edit: Sep 20, 2024, 01:24 AM by smf_adm
So, Mike, how would I remove the top to the OM-1?
 
I have an idea of what to do AFTER the top is off, but I can't find instructions to get there.

Aaron

Dec 22, 2007, 09:09 AM #3 Last Edit: Sep 20, 2024, 01:24 AM by smf_adm
You can refer to the OM-1 service manual through this site:
http://olympus.dementia.org/Hardware/

Rick_oleson

Dec 23, 2007, 03:01 AM #4 Last Edit: Sep 20, 2024, 01:24 AM by smf_adm
Here's the short version:  Unscrew the hub of the wind lever and lift it off.  Lift off the wind lever and unscrew a spanner nut under it.  Block the rewind shaft with a screwdriver blade and unscrew the rewind knob from it with your fingers.  Remove 2